Give you a brief introduction to nmn manufacturer | BONTAC

1.Raw material production process
Bioenzyme catalysis is a popular production method in the industry. It has a high threshold and several key catalytic enzymes are expensive, accounting for about 80% of the overall production process cost, but it is also the safest and most efficient production method. In the production of NMN by bioenzyme catalysis, the use of food-grade raw materials is an important part of the process to ensure product safety and to ensure that standards are followed.
2.High standard of production conditions
Production conditions refer to the standard of labor consumption required to complete the qualified products of the unit under certain production organization and production technology conditions. There are certifications issued by regulatory authorities, such as cGMP in the United States, TGA in Australia, GMP in Japan, etc.
3.High standard of product testing.
Product testing requires reliable test methods and reagents that are used throughout the production process. They are not only inspection standards for the final product, but also for the intermediate stages of control, including testing of active ingredients, testing of heavy metals such as lead, arsenic and mercury, and testing of pathogenic bacteria, microorganisms and processing by-products. 
For NMN products, the commonly used method for active ingredient content testing is high performance liquid chromatography (HPLC), which is efficient, accurate and precise. For different manufacturers, the standards for testing reagents are different. Strict manufacturers will purchase high purity, analytically pure reagents from third party standards companies as controls.
4.Safety assessment
For relatively new raw materials such as NMN, it is not enough for consumers to judge the safety of the product on the side of the merchant alone. At this point, the third-party authoritative assessment report is particularly important.
Currently, there are two generic safety assessment reports, one is a toxicological assessment report and the other is a safety assessment report. In China, toxicological assessment reports usually account for the majority. However, there are still few NMN companies that can issue such reports
5.Storage and Packaging
NMNs are usually stored in sealed containers for up to 12 months. If it can be stored for 24 months with insignificant changes in purity, the stability of NMN is very reliable. Currently, the more common packaging materials are pet or hope, which are pharmaceutical packaging materials. They are non-toxic, odorless, lightweight, portable and effectively isolate air and moisture.

The safety of NMN powder cannot be assessed since required clinical and toxicological studies have not been completed yet to establish the recommended safe levels for long term administration. Nevertheless, their safety and efficacy are uncertain and unreliable since most of them have not been backed up by rigorous scientific preclinical and clinical testing. This issue has been arisen as manufacturers are hesitant to pay for research and clinical trials due to potential lower profit margin, and there is no authorizing agency to regulate NMN products because it is often sold as functional food product rather than heavily regulated therapeutic drug. Therefore, more strict approval process has been demanded by consumer advocacy groups requesting regulatory agencies to set standard and restrictions for marketing anti-aging health products, considering safety, health and wellbeing of consumers. NMN should not be considered as a panacea for the elderly, because boosting NAD levels when not required may yield some detrimental effects. Therefore, the dose and frequency of NMN supplementation should be carefully prescribed depending on the type of age-related deficiency and all other confronting health conditions of the people. Other NAD precursors have been studied to discover the efficacy for diverse age-related deficiencies and they are used for particular deficiencies, only after they are proven for effectiveness and safe to use. Therefore, the same principle should be applied to NMN as well

First, inspect the factory. After some screening, NMN companied that directly face consumers pay more attention to brand building. Therefore, for a good brand, quality is the most important thing, and the first thing to control the quality of raw materials is to inspect the factory. Bontac company actually manufacturing NMN powder of high quality with the caterias of SGS. Secondly, the purity is tested. Purity is one of the most important parameters of NMN powder. If high purity NMN cannot be guaranteed, the remaining substances are likely to exceed the relevant standards. As the attached certificates demonstrates that the NMN powder produced by Bontac reach the purity of 99.9%. Finally, a professional test spectrum is needed to prove it. Common methods for determining the structure of an organic compound include Nuclear Magnetic Resonance Spectroscopy (NMR) and high-resolution mass spectrometry (HRMS). Usually through the analysis of these two spectra, the structure of the compound can be preliminarily determined.