Give you a brief introduction to nmn manufacturer | BONTAC

Give you a brief introduction to nmn manufacturer | BONTAC

In general, there are three main manufacture methods for NMN preparation utilized by NMN manufacturers in the world such as chemical or enzymatic synthesis, and fermentation biosynthesis. And at present, the NMN manufacturers are located worldwide including China, America, Japan and German.
Get A Quote

Advantages of NMNH

NMNH: 1. “Bonzyme” Whole-enzymatic method, environmental-friendly, no harmful solvent residues manufacturing powder. 2. Bontac is a very first manufacture in the world to produce the NMNH powder on the level of high purity, stability. 3. Exclusive “Bonpure” seven-step purification technology, high purity(up to 99%) and stability of production of NMNH powder 4. Self-owned factories and obtained a number of international certifications to ensure high quality and stable supply of products of NMNH powder 5. Provide one-stop product solution customization service

Advantages of NADH

NADH: 1. Bonzyme whole-enzymatic method, environmental-friendly, no harmful solvent residues 2. Exclusive Bonpure seven-step purification technology, purity up higher than 98 % 3. Special patented process crystal form, higher stability 4. Obtained a number of international certifications to ensure high quality 5. 8 domestic and foreign NADH patents, leading the industry 6. Provide one-stop product solution customization service

Advantages of NAD

NAD:  1. “Bonzyme” Whole-enzymatic method, environmental-friendly, no harmful solvent residues 2. Stable supplier of 1000+ enterprises around the world 3. Unique “Bonpure” seven-step purification technology, higher product content and higher conversion rate 4. Freeze drying technology to ensure stable product quality 5. Unique crystal technology, higher product solubility 6. Self-owned factories and obtained a number of international certifications to ensure high quality and stable supply of products

Advantages of MNM

NMN:  1. “Bonzyme”Whole-enzymatic method, environmental-friendly, no harmful solvent residues 2. Exclusive“Bonpure”seven-step purification technology, high purity(up to 99.9%) and stability 3. Industrial leading technology: 15 domestic and international NMN patents 4. Self-owned factories and obtained a number of international certifications to ensure high quality and stable supply of products 5. Multiple in vivo studies show that Bontac NMN is safe and effective 6. Provide one-stop product solution customization service 7. NMN raw material supplier of famous David Sinclair team of Harvard University

about us

We Have The Best Solutions for Your Business

Bontac Bio-Engineering (Shenzhen) Co., Ltd. (hereafter referred to as BONTAC) is a high-tech enterprise established in July 2012. BONTAC integrates R&D, production and sales, with enzyme catalysis technology as the core and coenzyme and natural products as main products. There are six major series of products in BONTAC, involving coenzymes, natural products, sugar substitutes, cosmetics, dietary supplements and medical intermediates.

As the leader of the global NMN industry, BONTAC has the first whole-enzyme catalysis technology in China. Our coenzyme products are widely used in health industry, medical & beauty, green agriculture, biomedicine and other fields. BONTAC adheres to independent innovation, with more than 170 invention patents. Different from the traditional chemical synthesis and fermentation industry, BONTAC has advantages of green low-carbon and high-value-added biosynthesis technology. What’s more, BONTAC has established the first coenzyme engineering technology research center at the provincial level in China which also is the sole in Guangdong Province.

In the future, BONTAC will focus on its advantages of green, low-carbon and high-value-added biosynthesis technology, and build ecological relationship with academia as well as upstream/downstream partners, continuously leading the synthetic biological industry and creating a better life for human beings.

Learn More

NMN powder produce methods utilized by manufacturers

NMN powder in general is typically produced via chemical or enzymatic synthesis, or fermentation biosynthesis. There are pros and cons to all three methods.
Chemical synthesis is expensive and labor intensive, and all raw ingredients used are categorized as “unnatural,” i.e., not from biological systems. There are, however, some advantages from the manufacturer’s perspective. The yield is well suited to mass NMN powder production, and all of those unnatural raw ingredients can be carefully controlled. But there are a number of drawbacks as well. Some of the solvents used in the manufacturing process are seriously bad from an environmental standpoint, and impurities and by-products can be challenging to remove from the finished product – that’s seriously bad for the consumer.
Enzymatic production of NMN powder, on the other hand, is considered a “green preparation method.” Like the chemical route, it’s pricey, but it offers a higher yield and impressively high purity. The finished NMN ticks all the boxes – stable, easily absorbed, lightweight, low density, and a low molecular structure.
Fermentation has also been explored as a method of producing NMN, but yield, though high quality, is pretty abysmal, so many supplement companies quite sensibly look to other, more efficacious processes.

NMN powder produce methods utilized by manufacturers

BONTAC NMN product features and advantages

1、“Bonzyme”Whole-enzymatic method, environmental-friendly, no harmful solvent residues manufacturing powder 
2、Exclusive“Bonpure”seven-step purification technology, high purity(up to 99.9%) and stability of production of NMN powder 
3、Industrial leading technology: 15 domestic and international NMN patents
4、Self-owned factories and obtained a number of international certifications to ensure high quality and stable supply of products of NMN powder  
5、Multiple in vivo studies show that Bontac NMN powder is safe and effective
6、Provide one-stop product solution customization service
7、NMN raw material supplier of famous David Sinclair team of Harvard University.

BONTAC NMN product features and advantages

Be careful to the fraudulent NMN products in the market

According to recent industrial report, only several products from worldwide NMN manufacturers came close to meeting label claim and contain not enough NMN. Almost products performed better, having at least 88% of the label claim up to small overages. A lone 250 mg product was identified as BRL. In sum, ChromaDex said that 64% of the products tested contained less than 1% of the stated amount of the active ingredient. which should give consumers pause. While this is a limited snapshot of the vast NMN finished product landscape. it does provide a glimpse into the high variability   of product quality that is available. The majority of the products may purchase online contain such a small amount of NMN that there would be no clinical benefits achieved from the dose. Another concern with these adulterated products is that the actual contents are not known and could pose a risk to the user the company said in a statement.

Be careful to the fraudulent NMN products in the market
User Reviews

What users say about BONTAC

BONTAC is a reliable partner that we have been working with for many years. The purity of their coenzyme is very high. Their COA can achieve relatively high test results.

Front

I discovered BONTAC in 2014 because David's article in cell about NAD and NMN related showed that he used BONTAC's NMN for his experimental material. Then we found them in China. After so many years of cooperation, I think it is a very good company.

Hanks

I think green, healthy and high purity are the advantages of BONTAC's products compared with others. I still work with them to this day.

Phillip

In 2017, we chose BONTAC's coenzyme, during which our team encountered many technical problems and consulted their technical team, which were able to give us good solutions. Their products are shipped very fast and they work more efficiently.

Gobbs
Frequently Asked Question

Do you have any question?

1.Raw material production process
Bioenzyme catalysis is a popular production method in the industry. It has a high threshold and several key catalytic enzymes are expensive, accounting for about 80% of the overall production process cost, but it is also the safest and most efficient production method. In the production of NMN by bioenzyme catalysis, the use of food-grade raw materials is an important part of the process to ensure product safety and to ensure that standards are followed.
2.High standard of production conditions
Production conditions refer to the standard of labor consumption required to complete the qualified products of the unit under certain production organization and production technology conditions. There are certifications issued by regulatory authorities, such as cGMP in the United States, TGA in Australia, GMP in Japan, etc.
3.High standard of product testing.
Product testing requires reliable test methods and reagents that are used throughout the production process. They are not only inspection standards for the final product, but also for the intermediate stages of control, including testing of active ingredients, testing of heavy metals such as lead, arsenic and mercury, and testing of pathogenic bacteria, microorganisms and processing by-products. 
For NMN products, the commonly used method for active ingredient content testing is high performance liquid chromatography (HPLC), which is efficient, accurate and precise. For different manufacturers, the standards for testing reagents are different. Strict manufacturers will purchase high purity, analytically pure reagents from third party standards companies as controls.
4.Safety assessment
For relatively new raw materials such as NMN, it is not enough for consumers to judge the safety of the product on the side of the merchant alone. At this point, the third-party authoritative assessment report is particularly important.
Currently, there are two generic safety assessment reports, one is a toxicological assessment report and the other is a safety assessment report. In China, toxicological assessment reports usually account for the majority. However, there are still few NMN companies that can issue such reports
5.Storage and Packaging
NMNs are usually stored in sealed containers for up to 12 months. If it can be stored for 24 months with insignificant changes in purity, the stability of NMN is very reliable. Currently, the more common packaging materials are pet or hope, which are pharmaceutical packaging materials. They are non-toxic, odorless, lightweight, portable and effectively isolate air and moisture.

The safety of NMN powder cannot be assessed since required clinical and toxicological studies have not been completed yet to establish the recommended safe levels for long term administration. Nevertheless, their safety and efficacy are uncertain and unreliable since most of them have not been backed up by rigorous scientific preclinical and clinical testing. This issue has been arisen as manufacturers are hesitant to pay for research and clinical trials due to potential lower profit margin, and there is no authorizing agency to regulate NMN products because it is often sold as functional food product rather than heavily regulated therapeutic drug. Therefore, more strict approval process has been demanded by consumer advocacy groups requesting regulatory agencies to set standard and restrictions for marketing anti-aging health products, considering safety, health and wellbeing of consumers. NMN should not be considered as a panacea for the elderly, because boosting NAD levels when not required may yield some detrimental effects. Therefore, the dose and frequency of NMN supplementation should be carefully prescribed depending on the type of age-related deficiency and all other confronting health conditions of the people. Other NAD precursors have been studied to discover the efficacy for diverse age-related deficiencies and they are used for particular deficiencies, only after they are proven for effectiveness and safe to use. Therefore, the same principle should be applied to NMN as well

First, inspect the factory. After some screening, NMN companied that directly face consumers pay more attention to brand building. Therefore, for a good brand, quality is the most important thing, and the first thing to control the quality of raw materials is to inspect the factory. Bontac company actually manufacturing NMN powder of high quality with the caterias of SGS. Secondly, the purity is tested. Purity is one of the most important parameters of NMN powder. If high purity NMN cannot be guaranteed, the remaining substances are likely to exceed the relevant standards. As the attached certificates demonstrates that the NMN powder produced by Bontac reach the purity of 99.9%. Finally, a professional test spectrum is needed to prove it. Common methods for determining the structure of an organic compound include Nuclear Magnetic Resonance Spectroscopy (NMR) and high-resolution mass spectrometry (HRMS). Usually through the analysis of these two spectra, the structure of the compound can be preliminarily determined.

Our updates and blog posts

Bontac keeps on innovating and has won a foreign invention patent

Recently, a piece of good news came from the Japan Patent Office (one of the largest patent offices in the world) across the ocean to Shenzhen. The patent for "A STABLE NICOTINAMIDE RIBOSE COMPOSITION AND ITS PREPARATION METHOD" applied by Bontac  was approved and issued a certificate. This invention patent is of great significance to the stability of Bontac coenzyme series products. This is another new recently patent obtained by Bontac after accumulating more than 150 patent applications. Such impressive achievements in scientific research are undoubtedly the best commendation for the innovative spirit of Bontac Biotech. Invention Title: A STABLE NICOTINAMIDE RIBOSE COMPOSITION AND ITS PREPARATION METHOD Technical advantages: Industrial artificial preparation of nicotinamide ribosehave made considerable progress to prepare relatively pure nicotinamide ribose at a lower cost. However, the monomer will become a viscous solid within a few seconds or minutes under ambient temperature and humidity as nicotinamide ribose is very easy to absorb moisture, and will disintegrate into oil within a few hours. In order to keep nicotinamide ribose as a dry solid, it needs to be stored in an absolutely dry environment, or frozen stored at about -20°C, which severely restricts the commercial application and promotion of nicotinamide ribose. Therefore, the development of stable nicotinamide ribose products has become a major problem that needs to be solved urgently. The purpose of the present invention is to solve the technical problem that the nicotinamide ribose monomer mentioned in the above background art is difficult to preserve and cannot be promoted and applied because it is very easy to absorb moisture and decompose. The invention provides a nicotinamide ribose composition with stable properties, easy storage, transportation and use. Only by continuously innovating technology can we adapt to the new opportunities in the new era, "respond to all changes" before new challenges, and produce a qualitative leap based on quantity. In the current favorable situation, Bontac Biotech's innovation plan is still non-stop, focusing on the overall market direction, paying attention to every link, solving every subtle problem, and writing Bontac's legend with active innovation. At this stage, Bontac Bio will continue to build a better R&D team, increase investment in scientific research, create better products for our customers, and empower greater value.

Supplementing NAD+ precursors as a promising approach for DPN

1. Introduction Diabetic peripheral neuropathy (DPN) is one of the most frequent complications of diabetes, ans also a major cause of foot ulcers, disability, and eventual amputation. With the prolongation of the diabetes, about 50% of people with diabetes will eventually develop DPN. Notably, supplementing NAD+ precursors could alleviate DPN symptoms by increasing the NAD+ level and activating the sirtuin-1 (SIRT1) protein. 2. The reversal effect of NAD+ precursors on DPN In vitro, the Dorsal Root Ganglion neurons (DRGs) isolated from diabetic mice are exposed to the NAD+ precursor Nicotinamide Riboside (NR) or Nicotinamide Mononucleotide (NMN). It is found that the NAD+ level, the SIRT1 protein, and the deacetylation activity are elevated, followed by the boosted neurite growth, the improved nerve function, and the reversal of IENFD loss. In vivo, supplement of NMN or NR also offsets the neuropathy in C57BL6 mice induced by streptozotocin (STZ) or high fat diet (HFD), as manifested by the improved sensory function, normalized nerve conduction velocities, and restored intraepidermal nerve fibers. 3. The increase of neurite length in a SIRT1-dependent manner post the addition of NMN/NR SIRT1, one of the most unique NAD+ consuming enzymes, can protect against DPN when activated, which may attribute to the improved mitochondrial function and energy homeostasis. Apart from these, SIRT1 activity in the nucleus can deacetylate the transcriptional and co-transcriptional factors that regulate glucose homeostasis and fat oxidation. The activation of SIRT1 is critical for axonal regeneration. NMN/NR treatment or transfection with SIRT1 overexpression vector can directly facilitate the neurite growth in cultured DRG neurons, which however is hindered by the SIRT1 inhibitor EX527, hinting the significance of SIRT1. 4. The association of SARM1 with NMNAT2 in axonal degeneration of DPN Sterile alpha and Toll/interleukin-1 receptor motif-containing 1 (SARM1) controls the axonal degeneration and regeneration via a well-regulated system comprising NAD+ and NMN. NAD and NMNAT2 can boost vesicular glycolysis and axonal transport to maintain the axonal health. The mitochondrial localization of SARM1 complements the coordinated activity of NMNAT2 that promotes axonal survival. 5. Conclusion Supplementing NAD+ precursors may be a promising approach for the treatment of DPN. A SARM1 inhibitor coupled with either NR or NMN may be more effective than a single agent alone in preventing or treating DPN. Reference Chandrasekaran K, Najimi N, Sagi AR, et al. NAD+ Precursors Reverse Experimental Diabetic Neuropathy in Mice. Int J Mol Sci. 2024;25(2):1102. Published 2024 Jan 16. doi:10.3390/ijms25021102 BONTAC NMN and NR BONTAC has dedicated to the R&D, manufacture and sale of raw materials for coenzyme and natural products since 2012, with self-owned factories, over 160 global patents as well as strong R&D team consisting of Doctors and Masters. Different from the traditional chemical synthesis and fermentation industry, BONTAC has advantages of green low-carbon and high-value-added biosynthesis technology.  Both the precursors NMN and NR are available in BONTAC. The high purity and stability of products can be better ensured here with the exclusive Bonpure seven-step purification technology and Bonzyme Whole-enzymatic method. Disclaimer This article is based on the reference in the academic journal. The relevant information is provide for sharing and learning purposes only, and does not represent any medical advice purposes. If there is any infringement, please contact the author for deletion. The views expressed in this article do not represent the position of BONTAC.  Under no circumstances will BONTAC be held responsible or liable in any way for any claims, damages, losses, expenses, costs or liabilities whatsoever (including, without limitation, any direct or indirect damages for loss of profits, business interruption or loss of information) resulting or arising directly or indirectly from your reliance on the information and material on this website.

The Immuno-Enhancing Effect of Rh2-L on Double Emulsion Adjuvant Against Foot-and-Mouth Disease

1. Introduction At present, vaccine is the preferred option for the prevention of foot-and-mouth disease (FMD), for which the adjuvant is essential due to its strong role in boosting immune response associated with vaccine antigens. Herein, Rh2 liposomes (Rh2-L) are prepared by ethano injection methods, then loaded into a double emulsion adjuvant and emulsified into a Water-in-Oil-in-Water (W/O/W) emulsion, together with FMDV antigen, for the prevention of FMD. 2. About FMD FMD, also known as aphthous fever, is a viral and fulminating infectious disease in which the foot-and-mouth disease virus (FMDV) violates hoofed livestock such as cattle, pigs and sheep. Since FMD is a zoonotic disease with high incidence and fast transmission speed, FMD vaccination is significant for those with long-term contact with livestock or low immunity such as the herders, veterinarians and children. 3.The significance of transform Rh2 into Rh2-L By transformation of Rh2 into Rh2-L, on the one hand, the poor solubility and hemolysis of Rh2 can be mitigated to a large extent. On the other hand, Rh2-L functions as a liposome. Noteworthily, liposome itself has been revealed to be an adjuvant in vaccine design to improve immune response by interacting with antigen-presenting cells (APCs), increasing the representation of immune stimulants to APCs, and stimulating innate immunity. 4. The immune-enhancing effect of Rh2-L on FMD vaccine Rh2-L has a immune-enhancing effect, as evidenced by an increase in humoral and cellular immune responses. In the FMDV model, the group of the FMD vaccine prepared with double emulsion adjuvants containing Rh2-L presents a more desirable protective effect relative to other groups. This group has a higher neutralizing antibody titer, stronger lymphocyte proliferation responses, and higher levels of cellular and humoral immune cytokine production, including IFN-γ and IL-4. 5. Conclusion Rh2-L can further boost the immune effect of the double emulsion adjuvant against foot-and-mouth disease, which may be a promising and powerful platform for subunit vaccine adjuvant. 6. Reference Saiya Miao, Qiufang Jing, Xuanyu Wang, et al. “Immuno-Enhancing Effect of Ginsenoside Rh2 Liposomes on Foot-and-Mouth Disease Vaccine”. Molecular Pharmaceutics. 2024 21 (1), 183-193. DOI: 10.1021/acs.molpharmaceut.3c00733 BONTAC advantages BONTAC is ·the first enterprise in China to provide mass production of ginsenosides (Rh2) by enzymatic synthesis. BONTAC has unique Bonzyme enzymatic synthesis technology. Our coenzyme products are widely used in health industry, medical & beauty, green agriculture, biomedicine and other fields. BONTAC has more than 160 invention patents, with strict third-party self-inspection. Both the high-quality product and excellent service can be better ensured here. BONTAC has 12 years of industry experience, which is worthy of your trust.  Disclaimer This article is based on the reference in the academic journal. The relevant information is provide for sharing and learning purposes only, and does not represent any medical advice purposes. If there is any infringement, please contact the author for deletion. The views expressed in this article do not represent the position of BONTAC.  Under no circumstances will BONTAC be held responsible or liable in any way for any claims, damages, losses, expenses, costs or liabilities whatsoever (including, without limitation, any direct or indirect damages for loss of profits, business interruption or loss of information) resulting or arising directly or indirectly from your reliance on the information and material on this website.

Get In Touch

Don't hesitate to contact with us

Sending your message. Please wait...